These replacement sensors are compatible with:
There are three available variations for the replacement sensors:
- 201115 – Sensor Only
- 201115-3.5 – Sensor with 3.5 metre cable and housing
- 201115-C – Sensor with 150 mm cable, block connector, and housing (This can be used if cable has already been routed).
Be sure to choose the correct sensor variation.
If your alarm was purchased before 2012, it is likely you have the old type of sensor housing which does not support sensor swapping. If this is the case AND you do not intend on rerouting your sensor cables, you will need to purchase 201115-C (Sensor with Connector Block).
If your product was purchased after 2012 you sensor housing will support sensor swapping. You will need to purchase 201115 (Sensor Only).
If you are replacing or rerouting the sensor cable completely, you will need to purchase 201115-3.5 (Sensor with 3.5 Meter cable).
If you are unsure which sensor variant you need, do not hesitate to contact us.
Note: It is recommended to replace the sensors every 2 years. All sensor housings have sockets, allowing easy fitting of replacement sensors, no tools required.